Metal hose clamps have one job: hold things tight. But tighten a bare metal clamp around a hose, cable, or tube, and you create a new problem—metal grinding against metal, vibration transfer, and eventually, surface damage or failure. That's where rubber lined hose clamps change the equation.
At Glorex, we manufacture rubber lined pipe clamps that combine a high-strength steel band with a bonded EPDM rubber insert. The result: firm holding power without the abrasion, noise, or corrosion that plague unprotected fasteners.
Why Rubber Lining Matters More Than You Think
A rubber hose clamp isn't just a metal clamp with a rubber strip glued on. The EPDM cushion is engineered to:
Absorb vibration – Critical in automotive, marine, and heavy machinery where constant motion wears through unprotected hoses
Prevent galvanic corrosion – The rubber barrier stops direct metal-to-metal contact between dissimilar materials
Reduce noise – Vibration transfer is a major source of rattling and hum in HVAC and industrial systems
Protect soft surfaces – Fuel lines, brake lines, and wiring harnesses stay intact without scuffing or pinching
For anyone specifying rubber pipe clips for OEM or maintenance applications, these aren't nice-to-haves. They're the difference between a system that lasts and one that fails prematurely.
W1 vs. W4: Choosing the Right Material
Not all rubber-lined clamps are built for the same environment. We offer two material configurations:
| Component | W1 | W4 |
|---|---|---|
| Steel Belt | Galvanized Iron | Stainless Steel 304 |
| Rivets | Galvanized Iron | Stainless Steel 304 |
| Rubber Insert | EPDM | EPDM |
W1 (Galvanized Iron) works well for indoor applications, standard automotive use, and general plumbing where corrosion isn't a primary concern.
W4 (Stainless Steel 304) is the choice for marine environments, chemical exposure, outdoor installations, and any application where rust resistance is non-negotiable.
Both options use the same high-grade EPDM rubber, rated for continuous operation from -40°C to 120°C, with short-term resistance up to 200°C.
Sizing Your Rubber Lined Hose Clamp
We stock clamps from 4mm up to 50mm to match common hose, tube, and cable bundle diameters. Bandwidth options include 12mm, 15mm, and 20mm, with material thicknesses of 0.6mm or 0.8mm depending on the size.
To select the right clamp:
Measure the outer diameter of your hose, pipe, or bundled cables
Match it to our size chart – each diameter corresponds to specific bandwidth and thickness options
Choose your material – W1 for standard use, W4 for harsh environments
If you're working with an unusual diameter or need a specific configuration, our engineering team can develop custom tooling to match your specifications.
Where Rubber Lined Clamps Perform Best
These clamps are specified across industries where reliability matters:
Automotive & Transportation – Fuel lines, brake lines, wiring harnesses
Industrial Machinery – Hydraulic systems, pneumatic lines, cable management
Marine & Offshore – Saltwater-exposed piping and conduit
HVAC & Construction – Refrigerant lines, electrical conduit, plumbing
Petrochemical & Power – Demanding plant environments where vibration and corrosion are constant threats
The common thread: applications where a loose clamp, a worn hose, or a corroded fastener creates real consequences.
About Glorex – Mika (Tianjin) Pipeline Technology Co., Ltd
We're a Tianjin-based manufacturer with nearly 100 employees, including 8 technical staff (5 senior engineers) and 15 pre- and post-sales professionals. Our focus is one-on-one service from design through delivery, backed by standardized quality control, precision tooling, and comprehensive testing equipment.
Our products serve automotive, military, engine air intake and exhaust, cooling and heating, irrigation, and industrial drainage sectors. Whether you need standard rubber lined hose clamps or a custom solution, we work directly with you to get it right.
FAQ
Q: What materials are available for your rubber lined hose clamps?
We offer two standard configurations: W1 (galvanized iron) for general-purpose applications and W4 (stainless steel 304) for superior corrosion resistance. Both use EPDM rubber inserts rated for -40°C to 120°C, with short-term tolerance up to 200°C.
Q: How do I choose the correct clamp size?
Measure the outer diameter of your hose, pipe, or cable bundle, then match it to our size chart (4mm to 50mm). Each size lists specific bandwidth and material thickness options. If you're uncertain, contact our sales team with your measurements.
Q: Can you produce custom sizes or configurations?
Yes. Our in-house technical team and precision tooling allow us to develop custom solutions for unique diameter, width, or material requirements. Send us your drawings or specifications for evaluation.
Q: Do these clamps actually reduce vibration?
Absolutely. The EPDM rubber cushion is specifically designed to absorb vibration, reduce noise, and prevent metal-to-metal friction. This makes them ideal for automotive engines, hydraulic systems, marine applications, and heavy machinery.
Q: Can I order samples before committing to a larger order?
Yes, we support sample orders so you can test fit and performance in your actual working conditions before placing a bulk order.
Hot Selling Products
Post time: Oct-09-2026
