FREE SHIPPING ON ALL BUSHNELL PRODUCTS
The products that serve the health needs of the population. According to WHO, these products should be available “at all times, in adequate amounts, in the appropriate dosage forms, with assured quality and adequate information, and at a price the individual and the community can afford”.
  • 10mm American type hose clmp

    10mm American type hose clmp

    The product uses a steel belt through-hole process to make its screws tightly engage the steel belt.
  • 8mm American set

    8mm American set

    This is a set.Easy to use, can be cut at any length.
  • 12.7mm American Set

    12.7mm American Set

    This is a set.Easy to use, can be cut at any length.
  • Pipe clamp

    Pipe clamp

    Pipe clamps can be ordered according to customer drawings.
  • Stamping

    Stamping

    Various stamping parts can be ordered according to customer drawings.
  • Stamping

    Stamping

    Various stamping parts can be ordered according to customer drawings.
  • The bay-type clamp

    The bay-type clamp

    This clamp has two bandwidths of 20mm and 32mm.There are all iron galvanized and all 304 materials.
  • British type hose clamp with welding

    British type hose clamp with welding

    The bottom of the housing for British type hose clamp with welding is welding.
  • V-band clamp

    V-band clamp

    V-band clamps are made of special steel fasteners, good corrosion resistance.This clamp is mainly used with flanges, flanges of different sizes cannot use the same groove, or leakage will occur, so the inquiry needs to provide flange or groove drawings.
    It is used to connect the outlet of the turbocharger and the exhaust pipe of cars. It can prevent the supercharger to be overburdened and the vibration is damaged and supercharger stress.
  • Uniaural non-polar hose clamp

    Uniaural non-polar hose clamp

    Uniaural non-polar hose clamp product is only 304 material, which provides better corrosion resistance, light weight and convenient installation.
  • U-clamp

    U-clamp


    Before the U-shaped clamp is assembled on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld to seal, and insert the lower part of the pipe clamp body, and put on to the tube, put the other half of the tube clamp and cover, and tighten with screws. Remember to directly weld the bottom plate of the pipe clamp.
    Folded assembly, the guide rail can be welded on the foundation, or fixed with screws.
    First install the upper and lower half pipe clamp body, put the pipe to be fixed, then put the upper half pipe clamp body, fix with screws, through the lock cover to prevent it from turning.
  • T-bolt with spring clamp

    T-bolt with spring clamp

    The T-bolt with spring clamps add springs on regular T-bolt clamp to accommodate larger joint size variations, providing uniform seal pressure and reliable seal performance.
1234 Next > >> Page 1 / 4